Skip to Content

Deschutes County road construction update: Week of June 25-July 1

Reconstruction work on Rosland Road
Deschutes County
Reconstruction work on Rosland Road

BEND, Ore. (KTVZ) -- Here is Deschutes County's road construction update for the week of June 25-July 1.

Chip Seal (Tumalo & Bend Areas) – Deschutes County crews will be chip sealing and/or fog sealing the following roads (weather permitting):

  • Innes Market Road
  • Johnson Road
  • Buck Drive
  • Stag Drive
  • Tyler Road

Traffic Information – Road users should anticipate single lane closures facilitated by flaggers and delays of up to 20 minutes during work hours. Work hours are 6:30 a.m. to 6 p.m., Monday through Thursday.

Paving of Rosland Road (La Pine Area) – Roadway reconstruction will be occurring on Rosland Road between U.S. Highway 97 and Wendy Road.

Traffic Information – Rosland Road remains closed to westbound traffic between U.S. 97 and Wendy Road through June 30. Tracy Road is not a designated detour route and is closed to through traffic. A detour route to U.S. 97 for westbound Rosland Road traffic is in place via Drafter Road. Access for eastbound traffic will be maintained. Work hours are 7 a.m. to 6 p.m., Monday through Friday.

Deschutes Market Road/Hamehook Road Intersection Improvement (Bend Area) – Excavation and utility work will be occurring along Deschutes Market Road and Hamehook Road.

Traffic Information – Road users should anticipate single lane closures facilitated by flaggers and delays of up to 20 minutes during work hours. Road users should also expect construction vehicle traffic entering and exiting roadways. Pioneer Loop is not a designated detour route, and is open to local traffic only. Work hours are 7 a.m. to 6 p.m., Monday through Friday.

Hunnell Road: Loco Road to Tumalo Road Improvement (Bend Area) – Earthwork and aggregate base placement will be occurring on Hunnell Road between Loco Road and Pohaku Road. Utility work will also be occurring along Hunnell Road.

Traffic Information – Hunnell Road remains closed between Rogers Road and Pohaku Road through July 25. Access for local residents will be maintained during construction. Hunnell Road also remains closed between Bowery Lane and Rogers Road. Local residents should access Bowery Lane from U.S. 97. Intermittent lane closures facilitated by flaggers may also be occurring. Road users should expect delays of up to 20 minutes during work hours. Work hours are 7 a.m. to 6 p.m., Monday through Friday.

U.S. Highway 20: Tumalo - Cooley Project (Bend Area) – Roundabout construction work will be occurring at the U.S. 20 and Old Bend Redmond Highway intersection and the U.S. 20 and Cook Avenue/O.B. Riley Road intersection.

Traffic Information – At the Cook Avenue/O.B. Riley intersection, the O.B. Riley Road leg will remain closed to traffic until mid-July. A designated detour route is in place via Bailey Road and Tumalo Reservoir Rd

At the Old Bend-Redmond Highway intersection, the existing north approach of Old Bend Redmond Highway to U.S. 20 remains closed. Traffic will continue to detour on the temporary roadway in close proximity to the existing north approach. Road users should expect delays during work hours.

Huntington Road Utility Work (La Pine Area) – Utility work will be occurring on Huntington Road north of Burgess Road.

Traffic Information – Road users should anticipate single lane closures facilitated by flaggers and delays of up to 20 minutes during work hours.

*** Note that work hours are subject to change based on weather conditions. ***

FOR MORE INFORMATION

Visit: deschutescounty.gov or TripCheck.com

Contact: Deschutes County Road Department at (541) 388-6581

Article Topic Follows: Deschutes County

Jump to comments ↓

KTVZ news sources

BE PART OF THE CONVERSATION

KTVZ NewsChannel 21 is committed to providing a forum for civil and constructive conversation.

Please keep your comments respectful and relevant. You can review our Community Guidelines by clicking here

If you would like to share a story idea, please submit it here.

Skip to content