ODOT Region 4 construction update: Week of July 2
Here’s ODOT’s Region 4 construction update for the week of July 2:
The Oregon Department of Transportation is committed to providing a safe, efficient transportation system. ODOT invests in Oregon’s future through roadway improvement projects. The following projects are located in ODOT’s Region 4 encompassing Central Oregon from The Dalles to Klamath Falls on the east side of the Cascades.
All work is dependent on weather conditions and schedules are subject to change.
Where traffic is routed through or around a work zone, pedestrians, including those with disabilities, will also be provided alternate routes through the work zone.
Crook County
OR 126 @ Tom McCall Roundabout – Alex Hodge Construction will be paving and striping connecting roads Monday night. There will be one-way traffic and flaggers, and delays of up to 20 minutes. The Contractor will also be working on light poles, planter strips and bioretention ponds. No traffic impacts are expected during the day.
Deschutes County
US 97: Sunriver Interchange to OR 31 – Roy Houck Construction will continue excavating and installing sidewalks and ramps on the westside of US 97 in La Pine on Monday and Tuesday. There will be shoulder closures and slow traffic.
US 20 @ Barclay Drive – Knife River will be constructing a trail along US 20 southeast of the roundabout. Minimal traffic impacts are expected.
US 20: Jack Lake Road to Pine Street (Sisters) – Oregon Mainline Paving is crushing rock at the Hogg Rock Quarry and stockpiling it across the highway. The right lane of eastbound 20 may be closed between MP 79.5 and 79.8. Grinding and paving is scheduled to start the night of July 8th.
Jefferson County
US 97: US 26 Jct. to NW 10th Street (Madras – Terrebonne) – Knife River will be grinding and inlay paving SB 97 working north from Opal Ln (MP 109) Sunday, Monday, and Thursday nights. There will be one-way traffic with flaggers and pilot cars between 7 pm and 7 am, with traffic delays of up to 20 minutes.
US 97: Spanish Hollow Creek & Trout Creek Bridges – Stellar J Construction is performing bridge replacement work. There may be one-way traffic with flaggers anytime. After the flagging is complete the construction zone will be switched over and controlled with signals.
Klamath County
OR 140: Buck Creek Bridge – Marcum & Sons Construction is beginning work to replace the Buck Creek Bridge (MP 22). Traffic will be controlled by a temporary signal and limited to a single lane. Work will take place Monday through Friday during daytime hours. Drivers can expect delays up to 10 minutes.
OR 240: Greensprings Interchange to Klamath Falls/Malin Hwy – Rocky Mountain Construction will be completing shoulder work, installing signs and concrete sidewalk. Minor delays are expected.
US 97: Algoma Road to Miller Island Road – Rocky Mountain Construction will be completing rumble strips, striping and legend work at night between the hours of 7pm and 7am on Monday and Tuesday. The work zone will be controlled with flaggers and pilot cars. Drivers can expect delays up to 20 minutes.
US 97: Spring Creek Hill to Modoc Point – Rocky Mountain Construction will be paving between the hours of 7pm and 7am, Sunday and Monday night. The work zone will be controlled with flaggers and pilot cars. Drivers can expect delays up to 20 minutes.
Lake County
US 395: South Fork Crane Creek – Marcum & Sons will be onsite completing survey, culvert and earthwork on Monday and Tuesday. Expect minor delays.
OR 140: Antelope Creek to Odegaard Road – LaDuke Construction will be on site completing earthwork and shoulder work. Expect 20 minutes delays Monday, Tuesday, Thursday and Friday.
Sherman County
US 97: Spanish Hollow Creek & Trout Creek Bridges – Stellar J Construction is completing drilled shaft construction access on US 97 over Spanish Hollow Creek. There may be one-way traffic with flaggers Sunday through Saturday anytime.
US 97: Shaniko to Trout Creek – High Desert Aggregate and Paving will not be on site this week due to the holiday.
Wasco County
I-84: Hood River to Tower Road – Oregon Mainline Paving will be onsite this week installing sign footings from exit 88 to exit 76. No work will be performed June 3rd and 4th due to the holiday. Expect no delays.
Wheeler County
Fossil Heritage Trail – Construction will take place Monday through Friday during daytime hours. The contractor may hold traffic on flagging operations for up to 20 minutes. Use alternate routes and expect delays when traveling through the listed areas of construction.
Various
Region 4 Curve Warning Signs – Baker Rock Resources will be installing signs on the Wasco Heppner Highway (US 206). There may be one-way traffic with flaggers and delays of up to 20 minutes.
