ODOT Region 4 construction update: Week of June 4

The Oregon Department of Transportation is committed to providing a safe, efficient transportation system. ODOT invests in Oregon’s future through roadway improvement projects. The following projects are located in ODOT’s Region 4 encompassing Central Oregon from The Dalles to Klamath Falls on the east side of the Cascades.

All work is dependent on weather conditions and schedules are subject to change.

Where traffic is routed through or around a work zone, pedestrians, including those with disabilities, will also be provided alternate routes through the work zone.

Crook County

OR 126 @ Tom McCall Roundabout – Alex Hodge Construction will continue paving the new roundabout during the day. Later in the week striping will be installed on the new pavement. No traffic impacts are anticipated during the day. The Contractor will also be working on shoulders at night with one lane on OR126 being closed and controlled by flaggers.

Deschutes County

US 20: Powell Butte Highway to Horse Ridge Frontage Road – High Desert Aggregate and Paving will be installing signs, and other safety features. There may be shoulder closures in limited areas.

US 20: Suttle Lake to Santiam Junction – Knife River be installing a new inlet on Monday. There may be one-way traffic with flaggers and a pilot car during the day.

US 20 @ Barclay Drive – Knife River will be constructing a trail along US 20 southeast of the roundabout. Minimal traffic impacts are expected.

Jefferson County

US 97: US 26 Jct. to NW 10th Street (Madras – Terrebonne) – Knife River will be grinding and inlay paving NB 97 north of the Crooked River Bridge beginning Sunday night. There will be one-way traffic with flaggers and pilot cars between 7 pm and 7 am, with traffic delays of up to 20 minutes. Contractor will also be overlaying the Crooked River Bridge during the day. There will be slow traffic with lane shifts and closures, but one lane of traffic each direction will be maintained.

US 97: Spanish Hollow Creek & Trout Creek Bridges – Stellar J Construction is performing bridge replacement work. There may be one-way traffic with flaggers anytime. After the flagging is complete the construction zone will be switched over and controlled with signals.

Klamath County

US 97 Link River Bridge Northbound Connection – The US 97 Link River Bridge northbound off-ramp is open to traffic. Crews will be doing minor shoulder clean-up. No delays are expected.

OR 140: Buck Creek Bridge – Marcum & Sons Construction is beginning work to replace the Buck Creek Bridge (MP 22). Traffic will be controlled by a temporary signal and limited to a single lane. Work will take place Monday through Friday during daytime hours. Drivers can expect delays up to 10 minutes.

OR 240: Greensprings Interchange to Klamath Falls/Malin Hwy – Rocky Mountain Construction will be completing shoulder work and installing signs. Minor delays are expected.

US 97: Algoma Road to Miller Island Road – Rocky Mountain Construction will be completing paving and should work between MP 265 and 267. Work will take place at night, Sunday through Thursday from 7pm to 7am. Delays up to 20 minutes are expected.

US 97: Spring Creek Hill to Modoc Point – Rocky Mountain Construction will be surveying and completing shoulder work. No delays are expected.

Sherman County

US 97: Spanish Hollow Creek & Trout Creek Bridges – Stellar J Construction is completing drilled shaft construction access on US 97 over Spanish Hollow Creek. There may be one-way traffic with flaggers Sunday through Saturday anytime.

Wasco County

I-84: Hood River to Tower Road – Oregon Mainline Paving will be closing the Eastbound and Westbound fast lanes between MP 64 – MP 70. The lane closures will be in place each night, Sunday through Friday morning between MP 70 and MP 64.

Wheeler County

Fossil Heritage Trail – Construction will take place Monday through Friday during daytime hours. The contractor may hold traffic on flagging operations for up to 20 minutes. Use alternate routes and expect delays when traveling through the listed areas of construction.

Various

Region 4 Curve Warning Signs – Baker Rock Resources will be completing the installation of sign bases on the Ochoco Highway (US 26). There may be one-way traffic with flaggers and delays of up to 20 minutes.